Hello

[jdcool4]

Hello I am John Im from Ohio I am 24 years old.I work as a heavy duty truck mechanic and have been doing that for about the last 5 years.I have been wanting a lathe and a mill since i was in high school and got to take a machine class with GM.Its been so long now i dont remember much of the stuff they taught me.But hopefully Ill be able to get some tooling and start learning.

 

[ShedBoy]

Hi John welcome to the site
Brock

 

[metalmad]

Hi John ;D

 

[steamer]

Welcome to HMEM John!

Dave

 

[b.lindsey]

Hi and welcome John. You will probably remember some of the basics from your high school class and remember, we all started from the same point at some time. This is a great place to ask questions, get opinions, and shhhare experiences. Jump right in and don't be afraid to ask whatever questions you may have!!

Regards,
Bill

 

[jdcool4]

Thanks every body i hope that some day i can do work half as good as the work that ive seen here.

 

[compspecial]

Welcome John, its like riding a bike

 

[Maryak]

John,

Welcome to our forum. wEc1

Best Regards
Bob

 

[Tin Falcon]

Welcome to one of the greatest learning resources on the internet for model engine builders. Tooot Toot.
This post should answer many questions.
http://www.homemodelenginemachinist.com/index.php?topic=9413.0

Brows read learn and do not be afraid to ask questions.
Tin

 

[jdcool4]

I cant wait till i get a lathe and put some of this into practice.For now i just been reading as much as i can

 

[steamer]

Welcome!

Dave