- Joined
- Oct 9, 2009
- Messages
- 75
- Reaction score
- 40
I have been building model engines for several years now and am always looking for a cheap readily available fuel. I have run camp stove fuel and straight methanol. Methanol is hard to find in small quantities and a 55 gal. drum might be excessive for my needs. Camp stove fuel was my go to when I ran out of methanol but one of my engines knocked pretty bad because of the low Octane. I tried mixing the two but they like to separate.
I have finally settled on good old denatured alcohol solvent. I buy gallon cans of Sunnyside denatured alcohol at Menards. The MSDS says it is a mix of ethyl and methyl alcohols in some trade secret ratio. Don't care what the ratio is cause it seems to run well.
What is everybody else out there using.
I have finally settled on good old denatured alcohol solvent. I buy gallon cans of Sunnyside denatured alcohol at Menards. The MSDS says it is a mix of ethyl and methyl alcohols in some trade secret ratio. Don't care what the ratio is cause it seems to run well.
What is everybody else out there using.