Bazmak-Sx3 riser and tramming plts

[bazmak]

On another thread i described fitting a riser plt to the column which gained me
an additional 40mm z height.Worked well and very rigid.When it came to retram i struggled with shims taking me ages to get nowhere.Probably down to me,but i decided to make improvements.I replaced the 6x3x1" plate with 2 no plts 71/2x4x3/4" thk,incorporating 2 jacking screws in each corner.Looks and works well,but only time will tell

 

[RonGinger]

Nice idea for a tramming plate, I will remember that one!