Another simple pulsejet

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

deatharena89

Well-Known Member
Joined
Dec 7, 2009
Messages
82
Reaction score
8
Location
Chennai (India)
This is the simplest pulsejet you could make and costs only Rs.110 and has got a good throttling range,which you could see in the video..No need to strain much to start this engine it starts in a single attempt..If anyone need to make this design please reply here.. Thanks for watching see you all in the next pulsejet video..

[ame]http://www.youtube.com/watch?v=YunxVl2c9oY[/ame]
 
Magnificent! How much thrust has it got?
 
this has really got good thrust,tried to show an cloth near it but i was not able to do it,so much of force from the exhaust pipe..one day i will hook it up to a scale and find out the real thrust..

note: at the end when i tried to show a cardboard the engine got few holes in the welded parts.. :big: :big:

[ame]http://www.youtube.com/watch?v=P20LLkbpZSU[/ame]

 
Great video. Can u direct me to the plans ?
 
Herbiev said:
Great video. Can u direct me to the plans ?
k here is the plan..

note: flare the intake pipe compulsory..flare it from 3to3.5cm..place the fuel pipe at a depth of 4.3cm from the flare..the fuel pipe dia is 3mm..please dont use fuel pipe dia more than specified..

SSI.jpg
 
Back
Top