ejcheli
Well-Known Member
- Joined
- Feb 18, 2014
- Messages
- 50
- Reaction score
- 29
Video of it running:
http://youtu.be/76om16YeguQ?list=UUxFPM1NU6pD5U9Z0OeZK1cg
My engine build log can be found here:
http://www.homemodelenginemachinist.com/f31/6-cylinder-radial-22742/
A note about these drawings. I really TRIED to keep these up to date when I was building this engine but one or two things may be slightly off or perhaps not mentioned in these 3 drawings. There were a couple times that I had to tweak one thing or another due to my own mistakes, I adjusted my build and carried on. Also the custom pieces I build such as the base and legs to mount the engine and the counterweight mechanism that differed from the original plans I built from are not necessary clearly marked on these plans. I figured that other people would want to build and customize their own stands so I leave that up to the individuals. If there are any questions feel free to PM me or comment and I will do my best to help you out.
View attachment page1.jpg
View attachment page2.jpg
View attachment page3.jpg
http://youtu.be/76om16YeguQ?list=UUxFPM1NU6pD5U9Z0OeZK1cg
My engine build log can be found here:
http://www.homemodelenginemachinist.com/f31/6-cylinder-radial-22742/
A note about these drawings. I really TRIED to keep these up to date when I was building this engine but one or two things may be slightly off or perhaps not mentioned in these 3 drawings. There were a couple times that I had to tweak one thing or another due to my own mistakes, I adjusted my build and carried on. Also the custom pieces I build such as the base and legs to mount the engine and the counterweight mechanism that differed from the original plans I built from are not necessary clearly marked on these plans. I figured that other people would want to build and customize their own stands so I leave that up to the individuals. If there are any questions feel free to PM me or comment and I will do my best to help you out.
View attachment page1.jpg
View attachment page2.jpg
View attachment page3.jpg
