1960s AJ Every Plans for 1 1/2" Scale "Burrell"Traction Engine

[Iain Saker]

I found a set of plans at home that my Father bought in 1966. They are six pages of drawings by AJ Every of a F Stone design for a 1 1/2" scale model of a Burrell engine.
My Father is still alive but, at 80 years old, concedes he may not get round to making this now!
Are these plans likely to be of interest to anyone?

 

[marsh_boy]

I would love to see the plans

 

[William May]

I found a set of plans at home that my Father bought in 1966. They are six pages of drawings by AJ Every of a F Stone design for a 1 1/2" scale model of a Burrell engine.
My Father is still alive but, at 80 years old, concedes he may not get round to making this now!
Are these plans likely to be of interest to anyone?View attachment 113449

I would also be interested in the plans! "[email protected]"

 

[abby]

Hello Iain , are these plans for the Burrell "devonshire" single crank compound engine , I would also be interested in copies if available.
My father started building this engine back in the 1960's , the castings were also available from Fred Stone.
The engine was about half built before his death aged 89 , unfortunately the drawings have been lost.
Dan.

 

[Richard Hed]

I found a set of plans at home that my Father bought in 1966. They are six pages of drawings by AJ Every of a F Stone design for a 1 1/2" scale model of a Burrell engine.
My Father is still alive but, at 80 years old, concedes he may not get round to making this now!
Are these plans likely to be of interest to anyone?View attachment 113449

I too am interested in the plans but only as a study. I found that the last photo you had of the reciept was VERY revealing of the writer's personality. I wonder if that person is Fred Stone or someone else.

 

[mmarson21]

I found a set of plans at home that my Father bought in 1966. They are six pages of drawings by AJ Every of a F Stone design for a 1 1/2" scale model of a Burrell engine.
My Father is still alive but, at 80 years old, concedes he may not get round to making this now!
Are these plans likely to be of interest to anyone?View attachment 113449

Hi there i would be interested in a copy of these drawings from the person who got these I would be willing to pay any information would be appreciated many thanks Mark

 

[mmarson21]

Hello Iain , are these plans for the Burrell "devonshire" single crank compound engine , I would also be interested in copies if available.
My father started building this engine back in the 1960's , the castings were also available from Fred Stone.
The engine was about half built before his death aged 89 , unfortunately the drawings have been lost.
Dan.

Hi there did you have any luck in finding the drawings

 

[William May]

I never heard anything more about them, and never got an e-mail or other message about them either.

Lost to time.

 

[mmarson21]

I found a set of plans at home that my Father bought in 1966. They are six pages of drawings by AJ Every of a F Stone design for a 1 1/2" scale model of a Burrell engine.
My Father is still alive but, at 80 years old, concedes he may not get round to making this now!
Are these plans likely to be of interest to anyone?View attachment 113449

Hi what happened with these plans