scroc
Member
Father Time is closing in so:
For Sale my Select 10 X 26 backgear lathe and tooling,
Fractional Threads 4 tpi. To 112 tpi. (40 pitches)
Metric Threads .025 to 6mm (17 pitches)
Spindle Speeds 200 –1000 rpm direct drive (6 speeds)
Spindle Speeds 50–250 rpm backgear drive (6 speeds)
Spindle Nose 2.250 X 8 tpi / bore 7/8”
Spindle taper MT #4
Tailstock taper MT #2
Longitudinal feed .0034 ”to .0965” ipr.
Cross feed .0017” to .0482” ipr
Kobayashi Precision 3 jaw chuck
A88160V independent 4 jaw chuck
ER 32 Fractional collet set 3/32” – ¾” . 18 pieces
Ball Bearing Steady rest
Multiple Face Plates and dogs
Live and dead centers
Aloris AXA toolpost and toolholders, Aloris Boring and Knurling Heads
Multiple Boring Bars
Multiple HSS and carbide tool bits
Multiple Reamers, Clamps, V-Blocks
South Bend Milling Attachment
Multiple milling cutters, facing cutter and radius cutter.
$3500.00
Lathe is in very good condition, minimal wear on ways and lived it’s first life in my friends BMW motorcycle shop, then it’s second life in my home shop. Comes with custom heavy wood and metal copper plate covered workstand.
Local pickup and inspection at my shop out of Crescent City, CA. Forklift can be arranged for loading.
e-mail: [email protected]
Thanks for looking, Steve
Pictures on this link:
https://1drv.ms/a/s!AjFS6LaQV16VjDDPk1wxLR4zSCRK
For Sale my Select 10 X 26 backgear lathe and tooling,
Fractional Threads 4 tpi. To 112 tpi. (40 pitches)
Metric Threads .025 to 6mm (17 pitches)
Spindle Speeds 200 –1000 rpm direct drive (6 speeds)
Spindle Speeds 50–250 rpm backgear drive (6 speeds)
Spindle Nose 2.250 X 8 tpi / bore 7/8”
Spindle taper MT #4
Tailstock taper MT #2
Longitudinal feed .0034 ”to .0965” ipr.
Cross feed .0017” to .0482” ipr
Kobayashi Precision 3 jaw chuck
A88160V independent 4 jaw chuck
ER 32 Fractional collet set 3/32” – ¾” . 18 pieces
Ball Bearing Steady rest
Multiple Face Plates and dogs
Live and dead centers
Aloris AXA toolpost and toolholders, Aloris Boring and Knurling Heads
Multiple Boring Bars
Multiple HSS and carbide tool bits
Multiple Reamers, Clamps, V-Blocks
South Bend Milling Attachment
Multiple milling cutters, facing cutter and radius cutter.
$3500.00
Lathe is in very good condition, minimal wear on ways and lived it’s first life in my friends BMW motorcycle shop, then it’s second life in my home shop. Comes with custom heavy wood and metal copper plate covered workstand.
Local pickup and inspection at my shop out of Crescent City, CA. Forklift can be arranged for loading.
e-mail: [email protected]
Thanks for looking, Steve
Pictures on this link:
https://1drv.ms/a/s!AjFS6LaQV16VjDDPk1wxLR4zSCRK
