Search results

Thank you very much Jhon, Steve, Nelson, Cogsy, Natale, Chuck, David and Minh Thanh for the kind words. I got lots of help from great people from here. This my first finished engine project. Do I need to post it on the Fiished Projects Forum/Section? I already started the PeeWee engine. The...

Rachel, At koneboss.fi take a look on Optimum TU2004V it is a lathe with 300mm betwen centers. I have one and I recommend it. Tks, Edi

Wonderful work! As always your machining quality is amazing, as well as the photos and CAD details. Congratulations! Edi

Wonderful crankshaft Natale! Was not that hard right? Edi

Very nice building Natal. Congratulations! I liked the good idle. Take a look on the links suggested here https://www.homemodelenginemachinist.com/threads/turning-a-one-piece-crankshaft.6743/ Good luck with the new crankshaft Edi

I have spent a several hours trying to get a better carburator response. I remade the carburator 3 times and could not get better result than this. So I'm considering the project finished. I am very grateful to all that helped me, giving tips and advises during the construction of this...

The only thing missing was the gas tank. I used a tube with 0.3 wall thickness. The two ends was a brass turned to the tube outside diameter with a small recess to fit the internal diameter of the tube then soldered it with tin. For the tank posts, I had to eliminate the internal thread on...

Hello to all! I was able to get some more work on the TI4. I have fixed the engine to the wooden base and built the gas tank. Because the base is very thick, it was not possible to screw the posts thru the bottom of the base. I split the post into two parts and use a wood screw internally then...

Congratulation George! Another amazing project from you. It is really a tiny engine. Edi

I purchased the plans six years ago and I used the following e-mails [email protected] and [email protected] I have not checked if those are still valid. Good luck Edi

I'm using the CDI with hall sensor from S/S Machine on my TI4 (4 cylinder) and it is working really fine, I'm very happy. Jim, if you order the CDI without the charger and batteries it will cost you $85,00 Edi

Hi to all! I also adapted a router spindle on the cross slid of the lathe. It is a small and sheap spindle, runs about 12000 rpm and fits well my small lathe (300mm btween centers). I only had to provide a shim to set the rigth center hight. First job was grinding the cylinder liners for the...

Hello Dr. This is a tons of hours of work. Impressive job. For being a Doctor you have great machining skills. Did you have some experince with machining/engineering before being a Doctor? Will be following with great interest. Keep the photos coming:D:D Edi

Congratulations Gbravo! Very nice/amazing work. I will be following with great interest. What CAM are you using? Edi

Hello to all! Little more progress on the TI4. I started the new carburetor. As said before, I'm not satisfied with the performance so, I decided to make another carburetor. For this time, I decided to change the way it was machined. The original drawing the dimensions depart from the side and...

Fantastic building Natalie! For sure it will run nicely. Congratulations! Edi

I would use google translator for the entire text and download a thecnical dictionary for the specific terms. Edi

Hello to all! Radiator is finished. Shroud installed. This video shows the machining of the top side of the radiator shroud with 10mm flat end mill Here machining the botton side of the shroud with 5mm flat end mill Next I will make a new carburator. Tks, Edi

Hi Ken! Thank you for your kidness sharing the plans. Those are a wonderful and priceless colection. Congratulations!!! Did you cast them by yourself? I loved the two opposed cylinders. How do I get the castings? Tks, Edi

Hi Jack! George Britnell has developed a marvelous replica project of a ford inline six take a look on the video bellow He has the plans available to be aquired. Edi