Search results

hello finished engine, before the video

hello before dismantling for painting .

hello water pump

hi tempory assembly

vas y Gedeon,lance toi !!:D

heat to approximately 800° orange/red color, immerse in quenching oil, then temper by heating to approximately 400° blue color, immerse again in oil

hello 3 sprockets in module 0.7, 16,20 and 40 teeth. camshaft support

the exhaust cam start to open at 45° BBDC and close at TDC the intake cam start to open at 10° ATDC and close at 10° ABDC

hello intake cam , exhaust cam,tappet,tappet bracket and rod eye

hello rockers

hello there are 2 springs, one lifts the leg, the other rests on the pawl .

hello rocker arm bracket and intake

it does not heat up much, no problem

I think I glued the bottom and top element with a cylinder sleeve. locktite yes adequate

fit tight pins plus chamfer for brazing if necessary

hello the crankshaft is produced by attached, pinned components, cut the through axis last. for the differential I put 4 bevel gears, 15 teeth,

hello end of work on cylinder heads, flanges and exhaust

hello https://www.ts-modelldampfmaschinen.de/gussteilesaetze-verbrennungsmotoren/verbrennungsmotor-karl-benz.html

hello a conical torque of 15/30 teeth module 1 for the motor

hello start of cylinder heads and valves