Search results

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. littlelocos

    Torch advice needed for boiler project

    Hello Chris, I have used the Sievert torches from Sweden for about 20 years now and can recommend them highly. They are pricey, but well worth it. They also work with the BBQ size tanks like you mention. I bought mine from Sulphur Springs Steam Models; however, they are long out of business...
  2. littlelocos

    F/S eBay - Robbins & Myers 1hp Motor - 1920's

    Hello All, I have decided to repower my 1920's-vintage Sebastian Gold Seal metal lathe with a modern motor and no longer need the motor that came with it. Robbins & Myers (looks to be from the 1920's, but runs great) ROBBINS & MYERS No. 284CT Horsepower: 1 Hp Type: RA Speed: 1750 RPM...
  3. littlelocos

    TurboCAD Reference Manuals

    The reference manuals have been sold. Thanks, Todd.
  4. littlelocos

    1/3-scale Parsell & Weed Engine

    Cool. Thanks. My understanding is that the P&W models may have had some alignment issues. I'm working through those by being very particular with the bottom end. Taking LOTS of photos as I go. For fun, here's a loose assembly of parts so far to get a better idea of how it's going to look...
  5. littlelocos

    1/3-scale Parsell & Weed Engine

    Hello All, Progress on the P&W vertical continues with the cylinder collars, side rods and bearing stands. Enjoy!! Todd. Todd & Joy Snouffer Littlelocos Model Engineering www.LITTLELOCOS.com www.facebook.com/littlelocos
  6. littlelocos

    TurboCAD Reference Manuals

    Hello, Just a short note to let you know that these have been posted on eBay with photos. See: http://www.ebay.com/usr/doodlebug-junction? Other goodies include a watchmaker's tool rest, R&M repulsion-induction motor, and a treadmill motor & VS driver kit. Enjoy!! Todd. Todd &...
  7. littlelocos

    TurboCAD Reference Manuals

    Hello All, Since CAD software is a frequent topic on the group, I have two TurboCAD Reference Manuals that I am selling: Version 15, covers TurboCAD and TurboCAD Pro, Like New, 2008, 7-1/2 x 9", 601 pages, B/W: $5.00 + postage at cost. (I think this was the last time a manual was included...
  8. littlelocos

    1/3-scale Parsell & Weed Engine

    Hello Jason. The Bore & Stroke are 0.80" x 1.312". Flywheels are 5" diameter. Overall height is about 11". We plan to have full kits for this engine, its horizontal twin, and the Essex Caloric Engine available late this year or early next year. Thanks, Todd.
  9. littlelocos

    1/3-scale Parsell & Weed Engine

    Hello All, Over the next several months I will be working on a prototype model of the Parsell & Weed gas engine of "Gas Engine Construction" fame. This is a model that I've been interested in for 20+ years (since it was first offered) and only was able to acquire about 1-1/2 years ago. I...
  10. littlelocos

    1/2-scale Essex Caloric Engine

    Hello All, I thought the group would enjoy a pic of my recently-completed prototype - a 1/2-scale replica of an Essex Caloric Engine (Stirling cycle). This is one of the projects I purchased from the Paul Jacobs family last Fall. It has been refined, completely redrawn, and (hopefully) will be...
  11. littlelocos

    Robinson hot air engine that will not run

    Yahoooooooo!!! That's GREAT news!! Congratulations guys! Todd & Joy. :);)
  12. littlelocos

    Robinson hot air engine that will not run

    Tom & Roy, We're looking forward to hearing how you make out. Enjoy!, Todd.
  13. littlelocos

    Robinson hot air engine that will not run

    Hello, I've spent a good deal of time studying Robinsons (and other) hot air engines lately. Hopefully the following can be of help. What is the material and thickness of the hot cap? Preference would be stainless steel with the walls as thin as possible. If made in several pieces, the cap can...
  14. littlelocos

    IT RUNS!!!! 1/2-Scale Essex Caloric Engine

    It's Official: The 1/2-scale Essex Caloric Engine (Stirling-cycle) I had at our booth at the Cabin Fever Expo is running. The final pieces of the puzzle came together last night with the installation of a stainless-steel-wool-filled regenerator in place of the original displacer piston...
  15. littlelocos

    Hot Air Engine-Driven Room Fountain Castings on eBay

    UPDATE: The last two fountain kits that I have for sale have been DEEPLY discounted in an effort to raise money for the first run of castings for the 1/2-scale Essex Caloric Engine. Right now, it looks like the next time we'll have these available may be late 2015 depending on several other...
  16. littlelocos

    AutoCAD LT vs Draftsight vs DoubleCAD XT

    While TurboCAD is not a subscription software service and doesn't require that you upgrade each year, they don't like it when you skip a year. It looks like you're still in good shape and can upgrade from V19 OR V20 to V21 for $69.99. For that, I'd go for it. See...
  17. littlelocos

    AutoCAD LT vs Draftsight vs DoubleCAD XT

    If it's been that long, you might want to give it another look. The first Windows versions were a bit awkward for those of us who were accustomed to using SEKEs (single-keystroke commands). BION, most of them still work some 10 or 15 versions in the future. Todd.
  18. littlelocos

    AutoCAD LT vs Draftsight vs DoubleCAD XT

    Here's a screen shot from this evening's work - deforming and rendering the fan for the Essex. The file for the Essex is just over 100MB with about 70 layers and 40 parts or assemblies modeled in 3D solids, along with 13 drawing sheets with details of each part. Probably a bit more than the home...
  19. littlelocos

    AutoCAD LT vs Draftsight vs DoubleCAD XT

    Hey Tin, Those messages crossed like two ships in the night. Saw your post right after I hit the send button. Cool, Todd.
  20. littlelocos

    AutoCAD LT vs Draftsight vs DoubleCAD XT

    Yes, I have used TurboCAD for about 10 or 12 years now and have found it to be very good. I use the Pro/Platinum Version 20 to design and produce drawing sets for Littlelocos Model Engineering's engine projects. Our current project is a 1/2-scale model of an Essex Caloric Engine. (Hot Air /...
Back
Top