Search results

Steve Tks for the link. I can see all the photos. But you were right when I go to open one PB wants me to pay. What a bunch of garbage. Tks for the link. It helps a bit. Another engine builder kept your file maybe we can work something out. Tks Again

Luc old buddy old pal. As one Canuk to another. is there any way i might get those off you. I live on Vancouver Island . You can PM me if we could work something out TKS Jerry

Steve just a note page 128 i cannot see the photo only PB saying go to some 3rd party and page 129 i can see the photos did something change?

Sorry Steve. I mean i cannot see your photos from the start of the build. I can see these last ones. any advice? i went back to the beginning f the build and right clicked on the image it did take me to photo bucket but would not load any photos. i bought the plans for the Demon and would like...

i cannot see your photos can you help me?

Hey guys thanks for all the help. I solved the problem. Turns out I did not have a problem at all just me!! Heres the deal. I would rotate the handle thinking every time I would come to 5,10,15 deg on the main table the micro handle should read 0. Well of course it does not. It only will read 0...

thanks for the info guys. So here goes. Say I turn the wheel counter clockwise to 0 on the main table. Being careful not to go clockwise. At zero I set the micro dial to 0. I then rotate the table counter clockwise a full 360 deg. When I reach 0 on the micro dial I still have 2 deg to go on the...

Yes. Everything is tight and no back lash.

Hey guys. I have an 8" rotary table. When I set it at zero and the micro handle to zero then rotate 360 deg back to zero on the handle the table is out 2 deg. Any thoughts?

In order to radius the top of this part I set the cutter on center and rotated the rotary table. When you do that because the cutter is on center {and it has to be} only the outside cuts so as you rotate the part the cutter path leaves a dome in the middle of the cut. The only way to eliminate...

Hey Guys. Just thought I would show you a pic of the rough finished cylinders. I solved the problem of milling a radius. With a little filing it should look OK. Now on to the next parts. Thanks for the help.

Yes this is a cad pic I got off the internet. Are there any engines similar to this one out there. Or again does anyone know of anyone who has built this engine. If not I have started it and would appreciate any input on the build. Here is one side of the cylinder partly done.

Has any body ever built this? https://d2t1xqejof9utc.cloudfront.net/screenshots/pics/9f2ab0abbc644a1ecc8b7ece0d8dcbf6/large.JPG

Hey guys Thanks for all the help. I tried everything. Fly cutting,2 and 4 flute end mills and regrinding a end mill flat. Nothing will work by rotating the part under the cutter. Here we go again (I thought I knew everything):confused:;). There is only one way to get close to doing what I am...

Thanks guys. I will try the 2 flute. Barring that I should be able to grind one of mu 2 flutes flat.

Tks "gbritnell". You hit the nail right on the head. So how do I do this?

Another pic

Here are some more pics. The table is trammed perfectly. The cutter is directly on center. When I rotate the part the cutter cuts low on the outside and high in the middle

Here is the other pic.

I am using a rotary table to mill the top of my cylinder blocks. As you can see in the pictures I am getting a line in the center of the cut. The end mill is sharpened low in the center