Search results

hi and welcum

hi and jump in and have fun

hi and Welcome to the forum

hi jump in and have fun

well its all a black art to me i will just stick with me drive belts

once they had cooled dawn i put them in the same tub as the other to then after sum time i drained off the acid then gave them a good scrub under ruining water then a good drying off with the blow lamp then gave them a gowning over with the rotary wire brush i then gave the drill bit one that...

sos left the pics out

the next thing is to remove the two broken drill bits from the tapers this was dun with me blow lamp one drill was 5/32 this will be replast with a 4 MM drill the other was 15/64 this will be replast with a 6.3 MM drill after removing the old broken drill i plaits a Small peace of silver solder...

HI not posted for sum time so this is a bit of haw to project right i have bin shopping today at my favourite shop i.e the boot sale and i picked up 4 No1 Morse taper drill bits one well rusty one not to bad and two broken they are all inch but will be converted to MM right the badly rusted one...

hi just my tip i use car lacquer out of rattle tins

hi and well dun

hi this my help don't no wot voltage you wont to run sumthing off but a 12volt fuel transfer pump no not the type for cars the ones used by the chaps that fly model aeroplane's or if like rumaging in scrap yards find a old Volvo their windscreen washer motes are of the gerd variety so the...

ITS A LIVE IT LIVES ONCE MORE I got a new capacitor from RS today for £6 and with the ade of a wiring diagram from emco its gnaw up and ruining I have only set it up on a on and off switch so no revers at present I have ordered a new switch from RS emco won't £60 for their switch from RS with...

hi jump in and have fun

HI jump in and have fun

HI and jump in and have fun

HI nice work

HI Jerry. fantastic

hi jump in and have fun

hi jump in and have fun