Search results

Hmm.... good point, my thoughts were to install VFD to suit largest MTR but then I guess no real protection for smaller MTRs. I have individual VFDs on each of my machines but was discussing this with someone who has 5 (dropping down to 3) Bridgeport mills in a row and he only ever uses one at...

This might be the place for this we question. I have often pondered putting one VFD on the wall and running all my machine from this one source, just need to have a plugin potentiometer at each machine. Rev counters are real cheap these days on eBay so every machone could have one. Thoughts...

When manufacturing large split bushings ie 6-8" diameter, we found one of the bigger issues was holding the bushing tight enough in the four jaw without crushing it which results in a bearing that is mishapen. We found that by matching inverted V's that matched the V grooves in the inner...

Another Colin here from Burlington Ontario, also a member of Hamilton Model engineering Club. Started model engineering close to 40 years ago and after a 30 plus year break just back into it recently. Have a Stuart V10 complete, a PM Research horizontal mill engine also complete and a ME...

McMaster does still ship to Canada, purchased some items this week, however, we are an established customer and have been for about 4 years. It must be a real pain to live in Australia when what is easily available in Europe and North America becomes almost a specialty item. We have this issue...

I have been "tinkering" with a geared engine between working on my serious projects and came upon the same issue of ring gear. Part of the intent was to use as many parts as possible that were lying around in my shop so my solution is to use a timing belt glued inside a ring. The inner gear is...

Perhaps you could post a link to your Ebay site.