Search results

Terry, It is looking very nice. Close now, should run just as well as your other engines, will be watching. Cheers Andrew

Brian, It looks good, can't wait and see what else will be done Cheers Andrew

Brian, For the amount you will be using, have you looked at company's that do Powder Coating, have a talk with them, you may be able to buy some from them. Cheers Andrew

Brian, That is not the one I was thinking about either, just the first I found, I think the one I was thinking about is on another site. Cheers Andrew

Brian, Found one at https://www.homemodelenginemachinist.com/threads/spark-plug-boots.32035/ I will have a look at other sites, there may be more Cheers Andrew

Brian, I remember that, he made black, white and clear boots, I will have a look around and see if I can find it Cheers Andrew

Brian, Good to see that it all worked, the flywheels look great, the powder looks like it flowed out great. I would like to get into this as well, but I just don't have the room. Cheers Andrew

I picked up a couple of these coils, They are a true "Buzz Type" coil, for only $8 Australian, They are cheep. Done some testing with a 2 cell LiPo battery(Running at 7.5 volt, not fully charged) the spark jumps 2mm gap easily. At 1mm(0.040") they give a nice blue spark, easily enough to fire a...

Brian, Try the automotive industry, they do the type of rubber you will need. Cheers Andrew

Brian, If you had to pay to have them made, you would just go and buy new ones from the manufacture, or just buy a whole new sandblasting cabinet, it most likely would be cheaper Cheers Andrew

Hi All, It's been a while, but one almost has a home. Just waiting on some more balsa to arrive for the nose of the plane. The plans can be found at https://outerzone.co.uk/plan_details.asp?ID=2925 Cheers Andrew

Have you thought about motorbike oil pumps, this is one out of a Yamaha 500 single, 29mm dia, only problem is it is 12mm thick. Just a thought. Cheers Andrew

Brian, It could be a timer, or a thermal overload(temp control) switch. Cheers Andrew

Brian, Just put a small piece of scrap in the oven and then check the temp, does not need to be powder coated Cheers Andrew

Toymaker, Have you taken mechanical drag into consideration? There is quite a bit with these types of pumps. Cheers Andrew

Brian, Take care of yourself Cheers Andrew

Brian, I would just start with the cardboard box to start, until you know how much mess it makes, then you could plan a permeant booth. Cheers Andrew

Yes they will not be seen in the engine, but we all know that they are there 😁 Cheers Andrew

Brian, Take it easy and listen to you body. Take plenty of brakes until you get every thing working correctly again. Cheers Amdrew

Brian, It's good to see you back machining parts again, take it easy or you could be back where you started. Cheers Andrew