timo_gross's latest activity

Yes, I tried it. Using mild steel, I was able to take a .010" deep cut with no chatter. Very nice surface finish. This is using the...

Did you already try the tool? How does it work?

I've been wanting to make one of these for quite a few years. Thanksgiving week finally gave me the opportunity to make one. First, I...

https://www.modelengineeringwebsite.com/Cherrrys_Model_Engines_1.html

How did you open them? I get weird things when trying. I answer myself: "right-click" then press "save-link-as" and confirm save. Then...

One (two) question`: Did Mr. Upshur publish more than one design? Are we discussing the same engine? When I read your post I have this...

Would it be a good idea to use a "life tool" on the toolpost and make those small ribs with a slitting saw? Just a thought, no idea if...

Hi! I'm trying to build a VW/Porsche engine in very small scale. The crank is ready. I found it challenging to make the cylinder's tiny...

The Mitutoyos at work, do not turn off automatically. The the particular model I linked the instruction to does turn off! There are...

Not sure :cool: Following document claims. 5 years of battery life, device switches off after 20 min inactive...

Some advocate a larger Dedendum for the smaller gear sizes of 1.4 so your 0.045" falls between the two...

I am a "metric Person" and not Expert. So I do not know. If I calculate 25.4 mm *0.045 = 1.143 mm it seems at least plausible. (assuming...

I would say, you are good to go as long as you keep center distance and ratio. (pressure angle does not change center distance) I used...

There will be no difference if you use th e14.5DP, OD, tooth count and gear centers remain the same.

In capitalism "people exploit people"; in communism it is the the other way round .... This old tony on youtube has working time travel...