timo_gross's latest activity

How did you open them? I get weird things when trying. I answer myself: "right-click" then press "save-link-as" and confirm save. Then...

One (two) question`: Did Mr. Upshur publish more than one design? Are we discussing the same engine? When I read your post I have this...

Would it be a good idea to use a "life tool" on the toolpost and make those small ribs with a slitting saw? Just a thought, no idea if...

Hi! I'm trying to build a VW/Porsche engine in very small scale. The crank is ready. I found it challenging to make the cylinder's tiny...

The Mitutoyos at work, do not turn off automatically. The the particular model I linked the instruction to does turn off! There are...

Not sure :cool: Following document claims. 5 years of battery life, device switches off after 20 min inactive...

Some advocate a larger Dedendum for the smaller gear sizes of 1.4 so your 0.045" falls between the two...

I am a "metric Person" and not Expert. So I do not know. If I calculate 25.4 mm *0.045 = 1.143 mm it seems at least plausible. (assuming...

I would say, you are good to go as long as you keep center distance and ratio. (pressure angle does not change center distance) I used...

There will be no difference if you use th e14.5DP, OD, tooth count and gear centers remain the same.

In capitalism "people exploit people"; in communism it is the the other way round .... This old tony on youtube has working time travel...

I did not think of slitting saws. Thinking of it Hemmingway kits offers a "graduating tool" for the lathe...

I never did something like this, but I would probably try to find a local laser engraving service to do it for me. (in my area this...

The modified bench top mill does it electronically. A spindle encoder is fed into the CNC controller. The CNC controller does the...

Loved the comedy vid. I used to be very interested in electronics. I know that if one takes the time to learn how basic things like...