Sparky_SC's latest activity

I plan on building the one with the wood baffle inside. The plans are on the net, even linked in your sandblaster thread as I recall...

Most use pvc piping for the vacuum/cyclone plumbing. Lexan is expensive, they come with just cheap plexiglass but many have used...

The last few days have been busy with other breakdowns and problems but I have been able to get some things done on the engine. This...

How about a picture of the rubber molding in question? My harbor freight cabinet does not use a molding, yours appears to be a older model.

I have read reports how some that had problems with media returning to the bottom mounted a "vibrator" to the outside to the hopper.

I recently bought new gloves for my sandblast cabinet. I almost ordered one of the less expensive pairs but noticed they were the...

The cyclones work suprisingly well, even with fine material. .

The Oneida Dust deputy is one of the cheapest and gets great reviews for use with sandblast cabinets.

It remains siphon feed with that modification. The media is still lifted from the bottom of the hopper to the gun with suction, no...

George, Sorry to hear that you have to part with your machines due to health. I respect you as one of the most skilled builders and a...

I have seen some comparisions by JasonB and others, and as I recall, many/most ? model IC engines have valve timing and ignition timing...

I am wondering if you could pull it off on the lathe using a form tool and a threading operation? Probably another of my crazy ideas.

Everything he does blows me away !

That is just absurdly impressive work ! This thread just blows me away...... .