Jasonb's latest activity

We usually have people using lathes and sometimes a mill at shows and they do at least on one of the stands let children have a go on...

You use a hone for honing and a lap for lapping. Quite a few choices such a scommercial laps as linked to above, you can make your own...

That is not a good combo on an IC with no rings as the heat will likely make th episton expand and sieze the engine. Cast iron will be...

Fuel tube clamps, try a RC model supplies .This is a UK one https://www.modelfixings.co.uk/rc_fittings.htm#Fuel%20Clamps

I'd also suggest you look at that cam you made a couple of days ago, looks nothing like the first pair you made, not sure what you have...

Regarding the one day or multiple days we have had similar here. Usual practice was to drop off exhibits the day before or possibly...

That is good that SW can do it so you should be able to do as I have done and see how the timing works, saves having to keep pulling the...

Well it's nice to dream. But in the real world most of these old casting set designs were often done by someone who had the full size...

Here you go Brian, that same assembly being rotated Read the bottom right first to see what is going on with the right side cylinder...

At the risk of wasting my time I will suggest you take the cover off the top of your older opposed twin an look at the cam positions...

But as we have discussed before who is going to buy into a money looser. Those that have put things up for sale want a lot of money...

You really are getting confused how can one cam open a valve and the other close it when the cam follower and pushrod to each valve only...

Its a lot for someone getting on in years to take on. No doubt he will want to recover the cost of buying the rights. So these days it...

Not totally sure of US law but in the UK I think it remains copyright until 75yrs after the authors death. At least if the ownership of...

It is geneally accepted that trading the actual printed old magazines is OK. The copyright issue arrises when someone distributes...