You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support Home Model Engine Machinist Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
H
I used to go with my father when he worked on engines in the field. He had a portable lapping and grinding tool which he often used...
-
H
Every vibration problem has an excitation force. With IC engines it is the firing of the cylinders that create the pulse. How close...
-
H
Yes, it is possible but the vibration impulses would be very difficult to manage. Not sure how you compensate for that . The vibration...
-
H
Depends on how you cool the water. I would be tempted to modify a air conditioner for that service and use a glycol with a rust...
-
H
Flywheels are used to store inertial energy to help balance engine vibration and force the crank past a dead center point. It smooths...
-
H
I would be tempted to reverse the angle iron to open up the air flow area and get rid of the dead spots where ash can accumulate. And...
-
H
There is a part of this story that is missing. It deals with the economics of standards and who sets them. The standards are often...
-
H
And this can be proved mathematically using thermodynamics that the efficiency is directly proportional to the compression ratio. The...