hawkeye1101

Hi Lloyd, At the moment Im working on pistons. I bought piston and ring kits for a honda gx25 which are 35mm and close enough for bore...

Sure, Here is an example. For a bore size of 1.35" we want an uncompressed gap of about .140". (scale that proportionally to whatever...

I'm not familiar with Earl or his method, but I make my own piston rings if you are interested in that.

Hi Lloyd, I am also slowly building one of these engines as well. I would say I'm about 1/2 way done at this point. If you have any...

Did you get what you needed yet? I have the castings, plans, and gears etc. for this engine. I'm in the process of building one now.