GreenTwin's latest activity

That is a shockingly good finish on the pen. Learn something new every day. I have had some suggest using the high-fill auto...

I am not sure whose picture this is, but this is how I plan on making my Prusa printer enclosure. The inline fan should arrive today...

It is possible that something like that could work. I guess the plus side to using something like sheetrock joint compound is that it is...

I dried this piece with a hair dryer, and the sprayed on material is actually doing what I want it to do, ie: cover the surface with a...

Here is some sheetrock joint compound. 20 minute working time. This would give a lot more time. I may try this. This would allow me to...

Here is a spray-on texture. Not really what I am looking for, but in general, the right idea. .

I have seen quite a few beam engines, but never a beam located under the engine. That is a new one for me. .

Hope for the best; but prepare for the worst. That is what I say. .

I think your preparations are money well spent, but I hope they just collect dust. ;)

I received the airbrush today. The compressor is a bit weak, with perhaps a 50 psi max. I mixed up some fastpatch, about 3:1, and it...

I purchased some hearing aids, and at the initial setting, I could hear music much better, especially the frequencies that were low on...

Links wouldn’t be useful since the models I have may not be available in the UK. However, I have the same (but old) Harbor Freight 1” x...

That doesn't always work, there are patent trolls out there that are listed on the stock exchanges, if you want to learn a bit more...

Same guy I know is working on an engine and panarama for the Alva B, which is a tugboat from the late 1800's. Went down I think in one...

Pump Assembly The pump housing is made of several pieces of brass stock soldered together. Used acid paste and low temperature silver...