Brian Rupnow's latest activity

As far as calibration on the thermometer is concerned.--I put the thermometer in my wife's kitchen oven and set the oven for 400...

WOWZA!!!---It doesn't get much better than this. This is the flywheel that I just powder painted and baked in the Eastwood oven. This is...

I just ran out to see what's happening in my Eastwood oven, and the powder paint is flowing out beautifully. In fifteen more minutes I...

Today I absolutely HAD to try this out. Eastwood tells me they are sending me a new oven, no charge, but not until the end of November...

If my voltage supply was low enough to present problems with my oven, then all the other electrical things in my house would be acting...

I spoke to Eastwood again today regarding the new oven they are sending me. Found out that the ovens are back ordered and won't be in...

It's been an exciting, rewarding, and expensive August and September. For less than $800 I have a dedicated powder paint booth with fan...

Okay---New News!! I have spoken with the rep at Eastwood, tried a couple of things he suggested, and oven still won't go above 355...

Maybe rock and roll will be postponed for a bit. I can not get the bake oven from Eastwood up to 400 degrees F. I have followed all the...

And here we are---ready to ROCK AND ROLL!!!! The flywheel has been wiped down with acetone. I added a 1/8" aluminum plate to the bottom...

And yes boys and girls---Even the old and the lame can build a fixture to hold flywheels for powder painting. Nothing has been cleaned...

dsage---read my whole post. I cover the issue of masking one end of the exposed shaft in my previous post. I would hang the flywheel...

I am very happy with my sandblaster. One thing that I may change sometime in the future is the angled cone in the bottom. On this...

Items painted with powder paint should be painted "everywhere" in one go. There may be a way to powder paint and bake one side, then...

Right at the moment I have no plans for powder coating cast material. However, powder painting is so new to me that anything is...