Mike Ginn

IC-Man is spot on! If "casted" isn't happy for all the reasons above then let him engage a suitable attorney and let the attorney sent...

Agreed - my point was that with a slide rule you must estimate but with a calculator less so but it is still a good idea to estimating...

On a more serious note - using a slide rule teaches you to estimate the answer in very round numbers which helps you to check that the...

I just love RPN and use a HP35 in the workshop. The trouble is I have never really mastered a "conventional calculator using...

I've got several battery operated Mitutoyo Verners and micrometres. The Mitutoyo Verners do not turn off. My cheapo Vernier does...

The timing is not correct and it seems to be too stiff. I am using rings which are correctly sized and gapped on a good smooth parallel...

Yes I agree. My main aim (and its up for debate) was to make a presentable model to a good standard and if it didn't run I could live...

Hi Guys I have finished the Kiwi and mounted it on a base. A few things to note. The round device under the carb is the flywheel...

So why do you folks think there is the contrast between the UK and US shows (I have not been to a US show). Also is there really a...

Charles Many thanks for the video. You did a great job of showing most of the models and capturing the atmosphere. The really good...

Hi Randoo Its called a metering valve - I call it an air bleed valve. Basically It introduces air into the media to increase the flow...

I just fill the cabinet with 10 to 15Kg of media and no issues. I do however have an air bleed into the mixing chamber in the base to...