HMEL

Yes, if you are on land and your observations are correct and your time is correct and your charts are accurate and you have a good...

One very good reason for teaching this is the vulnerability of our satellites in orbit. Its also a good discipline to understand the...

Of all the high temperature rotating equipment I have been around they all used metal for couplers. I think with your machining skills...

You might consider trying to locate the winding diagrams if possible. Would give you a head start. Ac motors require a method of...

I know of at least one commercial boiler made of stainless. It is still in operation. Went in to a facility that supplied starch...

I looked at the burner configuration. There is no way it could not choke. Not enough clearance to the furnace top. Probably would work...

The simple answer is no. You would reduce the safety factor by over half. ( If there is one). Here is a simple explanation. The...

Ok, that definition makes sense but I have operated turbines where the throttle valves were split into as many as four sections so that...

I have read your comments and would kindly ask for what you consider the definition of partial admission. Most of my experience does not...

k2 There are three types of pumps you are asking a question about. They all require a clearance tolerance. The oil pumps are...

I thought I would give my two cents worth on dust collection of having spent most of my career dealing with dust collection systems of...